How to swap the saddle

You are here:
< All Topics

 

Tools you'll need

4mm Allen key

 

Instructions

The FLIT-16 is compatible with any standard saddle.

To remove the saddle, first, undo the seat post quick release and remove the seat post from your bike.

Place the saddle upside down on a table so that you can easily access the bolts on the saddle rails.

Undo both bolts using a 4mm allen key to remove the saddle from the seat post.

Slide the seat post back onto the saddle rails of your new saddle, making sure that the numbers on the seat post are pointing to the rear of the saddle.

Position the saddle rail clamps so that they hug the saddle rails.

Once you’re happy with the positioning, tighten both bolts.

 

Previous How to fit the Klickfix handlebar adapter
Next Are mudguards available with the FLIT-16?
Contents

Pin It on Pinterest